Whether you’re going on a road expedition or making a quick stop in ~ the neighborhood center, it’s an important that your car has a functional spare tire at all times.

You are watching: How to remove spare tire from ford f150 without key

It’s equally necessary that you’re may be to gain the tire under from under the car when you require it. Some cars come with devoted tools to lower the preventive tire and quickly make the change.

However, if the tool is do not have for some reason, you can still bring down the tire and be earlier on the road in no time. Let’s take a watch at just how to obtain a preventive tire down without the tool.

Removing a spare tire without the factory tool is easy once you follow this steps:

get under the truck. Pull off the overview tube. Pull out the an essential with pliers. Insert crank right into the brand-new hole. Revolve the crank counterclockwise to lower the tire.


How to eliminate Spare tires From Ford trucks Without the Tool

Removing a spare tire without a tool could appear complicated at first. However, v the best equipment and also process, it’s not too complicated a task.

There space two methods to lowering a spare tires on a Ford truck. Each method uses various tools. As such, your an option will count on the equipment you need to hand.

Method One

This technique involves pulling out the vital from the spare tires drop assembly and also using stock spare tire tools to reduced the tire.

To comprise for the absence of the manufacturing facility key, friend will require some standard tools prefer joint pliers, tiny pieces of wood and an optional helping hand.

After you’ve gathered the tools, monitor the steps below to remove the spare tire.

step #1: acquire Under the van

As you currently know, the tires hangs from the truck’s underside towards the vehicle’s rear. As such, you will need to go under to obtain access.

Before you acquire under the truck, mental that safety comes first. Therefore, ensure that you park the car properly, on a surface that’s as flat as possible, through all brakes engaged. These precautions space to prevent the vehicle from relocating while you work under it.

action #2: Locate and Pull turn off the guide Tube

Locate the guide tube under the vehicle. This is a long, black, plastic pipe near the tire. Twisted the tube back and soon while pulling it in the direction of the vehicle’s behind to expose the drop system for the preventive tire.

action #3: placed a Wedge in between the Tire and also the automobile

Still under the truck, move to the passenger side and also pull under the tires on this side, putting the timber in the gap between the top of the tire and also the truck bed frame.

At this point, you may need that optional helping hand to placed in the hardwood while you hold the tires down.

The factor for putting in the hardwood is to offer you easy accessibility to the drop mechanism without having actually to move the tires away from the van bed continually.

action #4: usage Pliers to Pull off the key

Put her hand through the an are created through the wood and feel for the key to the spare tire drop mechanism. The key roughly resembles a wheel lug nut, and when you find it, pull it out utilizing the jack or working pliers.

Sometimes, simply pulling the an essential may not be enough, and also you might need come wriggle the pliers as you pull.

step #5: reduced the tire to the floor

With the key out, the feet left behind is nearly identical come the jack crank. For this reason you have the right to use the share tire tools to lower and remove the preventive tire. Insert the jack crank into the hole and turn counterclockwise to lower the tire.


Method Two

The second technique differs considerably from the first. Accordingly, you require a different set of tools, including:

14mm socket. Hammer. Extender. Socket wrench. Flathead screwdriver.

With the tools above, girlfriend can lug down the spare tires by adhering to the procedures below.

step #1: settle the Socket to the Extender

Attach the 14mm socket come the extender. Friend don’t must use a high-quality socket, as any low-end one will do. It’s additionally best to use an extender long sufficient to with from the bumper come the spare tire. Aim for an extender that’s roughly 60–70cm long.

step #2: happen the Socket through the earlier Bumper

Insert the socket into the hole situated on the left (or right, in some trucks) that the patent plate. The hole leads directly to the key.

step #3: fight the Extender a couple of Times v the Hammer

Use a hammer come strike the extender when you feel the socket emotional the key. Hitting the extender pushes the socket end the key, giving a far better grip.

Four to 5 blows from the hammer need to be enough. Additionally, perform not use too much force to the hammer come prevent damage to the fall assembly. You nothing necessarily have to use a hammer; any type of object big and hard enough have the right to serve.

action #4: rotate the Socket Counterclockwise to reduced the tires

With the socket steady in place, usage a wrench to rotate the extender counterclockwise. The drop assembly vital is comparable to the one used on wheel lug nuts. Thus, it will turn as the socket turns.

It might be difficult to revolve the wrench at first, but it becomes much easier as you proceed turning, and also the tires gets closer come the ground.

action #5: eliminate the an essential From the Socket

By the time the tire hits the ground, the an essential will be loosened and you deserve to remove it. Retract the extender from the hole, and use a flathead screwdriver to pry the nut out of the socket.

step #6: Detach the tire From the Hoist

While the tire is now on the ground, friend can’t use it till you detach the from the hoist. Come disconnect the tire, reach right into the large opening in the middle of the wheel. Next, locate the steel flange connected to the cable and also turn the from a horizontal to a vertical position, pulling it out of the rim vertically.

Finally, the hole left behind by the key can fit a jack crank. Placed the crank v the opening near the patent plate till it gets to the hole vacated through the key. Revolve the crank clockwise to raise the hoist ago up

How to remove Spare tires From Chevrolet truck Without Tool

While Chevys keep spare tires under the van bed like other trucks, the removal procedure differs. So, if you’re wondering how to lower spare tire on Silverado without tool, follow the measures below.

You will need a pair of tools, including an ignition key and a jack kit to make a chevy spare tires removal tool.

Step #1: locate the preventive Tire accessibility Hole

Like other trucks, the accessibility hole is on the rear patent plate’s appropriate side and covered v a rectangle-shaped shaped plastic.

Newer models may have actually a lock over the hole together a defense measure. In such cases, usage the ignition crucial to remove the lock assembly spanning the hole.

Step #2: rally the extension Rod

Open the jack kit and also select the rod through the wider end and also flanges on every sides. This pole is the “female” rod and the one you’ll insert right into the currently open keyhole.

Get an additional rod from the tool kit, and attach it to the finish of the female rod to do it long sufficient to with the spare tire from the bumper. Ensure the the press locks get in properly to prevent the rods native disconnecting if you’re turning it.

Step #3: Insert the Rod into the Hole

Insert the composite rod right into the spare tires hole. Press and turn the rod simultaneously until the finish locks right into the cable crank.

Step #4: revolve the rod Anticlockwise v a Wrench

Put a wrench ~ above the other end of the extension rod and turn counterclockwise. The tire will start to drop together you turn. Continue turning until the tire touches the ground once you can remove the cable flange from the rim.

Furthermore, you deserve to use the procedure above on various models the Chevrolet trucks. Together such, you deserve to follow the actions if you’re wondering how to remove spare tire from Chevy suburban.

Final Thoughts

It’s always an uncomfortable experience when you obtain a level tire. It’s even worse once you can’t gain the spare down for absence of the dedicated factory tool.

However, there room other means to carry down the spare tire even without the tool. These approaches are straightforward and also use common tools like extenders, flathead screwdrivers, sockets, ignition keys, chunks that wood, pliers and hammers.

See more: Fuse Box Diagram 2011 Jetta Se Fuse And Relay Diagram 2011 Vw Jetta

Thus, with or without a manufacturing facility tool, you can get the preventive tire the end in minutes and also be back on the roadway quickly.